Make a side table with hangers
We are going to make a side table for which we only need 4 wooden hangers, a small board and two slats.
We will turn the hangers into original legs that will give the table a modern and different touch. Do not miss the step by step!
Step by step to make a side table with hangers
We start sanding with a block of fine sandpaper the board and the slats.
We dust well and we set the slats to the board. First we make through holes with a fine wood drill.
Then we insert the screws.
The time has come to give colour, in this case very soft, with a water polish.
While the paint dries we put on the hangers. First we remove the hooks metallic
We place a hanger on another slightly inclined and mark the junction points.
Then we perform in one of them the through holes with the drill and a wood drill.
We place it on the other to guide us and do the same operation.
Once we have two pieces exactly the same we set the slats With some screws.
In this way 4 hangers have become two original and modern legs for our side table.