How to install a suspended bathroom cabinet

Easy, fast and functional; This is the work that we propose below. We are going to complete a bathroom, installing suspended furniture and a current and decorative backlit mirror.

In addition, we will give you some basic notions of plumbing so that you can install the sink without problems.

As he bathroom furniture like the closet as well as the mirror They come in kit, which includes everything you need for installation. When buying the sink, we must take into account the measurements of the furniture hole.

Likewise, the faucet and the drain must be suitable for it. In DIY stores we will find many models of sinks, faucets and plumbing parts.

  • Tools
  • Driver drill
  • Ø 6 mm wall drill
  • Silicone gun
  • PH2 tip
  • Wrench
  • Bubble level
  • Screwdriver
  • materials
  • Bathroom furniture in kit
  • Sink
  • Tap
  • Hoses
  • Drain trap
  • Silicone
  • Kit closet
  • Kit mirror

Step by step on how to install a suspended bathroom cabinet

Step 1
After calculating the furniture position, we point out fixing points in the wall and we make the holes, with the drill in percussion position and a widia drill bit of the appropriate diameter. In this case, Ø 6 mm.

Step 2
Next, we insert the plastic studs by hammer and we fix the plates with their corresponding screws.

Step 3
Now we can hang the furniture and adjust the hardware until it is completely level.

Step 4
We go now with the plumbing. Insert the drain, put the tap in the sink and screw the hoses.

Step 5
We apply silicone on the top of the furniture and put the sink, pressing to adhere properly. To give the silicone we will use an applicator gun.

Step 6
Then, we seal the joint between the sink and the wall using the same product. In this way, we will prevent water leaks and strengthen the restraint of the sink.

Step 7
When the product has dried, we connect the hoses to the water intakes, place the siphon and introduce the drawers in their rails.

Step 8
Following the same steps, we hang the upper auxiliary furniture.

Step 9
In the case of the mirror, we will put some scarps on the wall. We do the electric connections and hang the mirror. Finally, we remove the protective plastic.

Step 10
We already have the furniture set and the mirror perfectly installed. An easy and fast work, with which we will dress our bathroom, saving a few euritos and obtaining an optimal result.

Video: How to install a bathroom cabinet on a plasterboard wall (March 2020).

Leave Your Comment